Oleodinamica Marchesini V1000 V - EQ 10 two-way cast-iron flow divider-combiner

Oleodinamica Marchesini V1000 (V - EQ 10) is a cast-iron two-way flow divider-combiner. Its specified inlet-flow range is 3–6 l/min at P, with a 250 bar working-pressure rating and a separate 300 bar peak-pressure limit. The number in the type designation is not the maximum-flow rating.

The valve divides inlet flow equally between A and B and combines return flow in the opposite direction. It is intended for two equal actuators supplied by one pump and one directional control valve, without mechanical coupling. The manufacturer specifies a maximum ±3% error based on maximum inlet flow, with accumulated differences compensated at cylinder end of stroke.

Connect P to the supply and A/B to the actuators. P is 3/8" BSP; both A and B are 3/8 inch BSP. The stated flow limits refer to total inlet P flow, not the flow of each branch. Select the exact flow range for the circuit.

The cast iron body contains hardened and ground steel internal components. Seals are standard BUNA N and PTFE. The local PDF retains the complete relevant original ratings, circuit, drawings and conditions. Representative manufacturer product image for the V-EQ series. Refer to the exact article drawing in the local PDF for its port geometry and mounting interface.