Oleodinamica Marchesini V0205 VBPSL 1 single pilot-operated check valve

Oleodinamica Marchesini V0205 (VBPSL 1) is a single pilot-operated check valve with a maximum flow rating of 120 l/min and a maximum operating pressure of 220 bar. The original factory table specifies a pilot ratio of 1:3.5 and a check-valve cracking pressure of 1 bar.

Flow is admitted from V towards C and retained in the reverse direction until pilot pressure opens the check element. Connect V to the supply, C to the retained actuator side and PIL to the pilot-pressure line. Main V/C connections are 1" BSP; the separate PIL connection is 1/4 inch BSP.

The manufacturer specifies hardened and ground steel internal parts, standard BUNA N seals and a guided-poppet check element with negligible leakage. The original curves use oil at 50 °C and 30 cSt; these are test reference conditions, rather than an operating-temperature or viscosity range. No optional spring, seal or other configuration is generated for this article.

The local PDF retains the complete relevant factory code table, hydraulic schematic, original drawing and curves. Representative manufacturer product image for the VBPSL series. Use the exact article drawing in the local PDF to check its connections and mounting arrangement.