Oleodinamica Marchesini R1300 ODO 1/2 x 15L banjo with nut and olive

Oleodinamica Marchesini R1300 (ODO 1/2 x 15L) is a zinc-plated steel banjo with nut and olive for 15 mm outside-diameter tubing in the 15L series. The factory specifies a working pressure of 280 bar and a separate burst pressure of 780 bar for that tube series. Burst pressure is not an operating limit.

The banjo eye has a 21.2 mm unthreaded bore, distinct from the 15 mm tube diameter. Catalogue dimension L is 44.5 mm and mass is 0.14 kg. The nominal inch or 18 designation in the type name identifies the banjo execution; it does not make the eye bore a threaded BSP or metric port.

The ODO execution connects the tube through the supplied nut and olive. Use the factory drawing to identify the compression connection and banjo mounting interface.

Orient the fitting during installation, fit the tube or connection as shown in the applicable factory drawing and secure the banjo with the matching hollow screw. The stated 360-degree adjustment concerns assembly orientation; this is not a fast or continuously rotating hydraulic joint. No custom /M length code is generated.

The local PDF retains the complete relevant original code tables, drawings and manufacturer conditions. Representative manufacturer product image for the ODO series. Use the exact article drawing in the local PDF to check its connections and mounting arrangement.