Festo VUVG-LK10-M52-AT-M5-1R8L-S pneumatic solenoid valve
Click image to enlarge
Pneumatic directional valve

Festo VUVG-LK10-M52-AT-M5-1R8L-S pneumatic solenoid valve
Model: VUVG-LK10-M52-AT-M5-1R8L-S · Festo
  • Manufacturer:
    Festo
  • Model:
    VUVG-LK10-M52-AT-M5-1R8L-S
Maximum operating pressure (bar)7
Flow directionNon-reversible
Valve configuration5/2-way, single solenoid
Control typePiloted
Permissible voltage fluctuations+/-10%
Valve size (mm)10
Full specifications ↓ Technical catalog · PDF

Description

VUVG-LK10-M52-AT-M5-1R8L-S is a Festo pneumatic solenoid valve, factory part number 8042543. Its valve configuration is 5/2-way, single solenoid and its actuation is electrical. The working connection is M5.

The factory datasheet specifies 195 l/min standard nominal air flow, standardised to DIN 1343. The operating pressure range is 2.5 to 7 bar. This execution uses 24 V DC electrical supply. The return mechanism is pneumatic spring. The operating medium and lubrication requirements are recorded separately from pressure and temperature limits.

Lubricated operation possible (in which case lubricated operation will; always be required). Select the complete factory execution by its part number.

Full specifications

Technical specifications
Component type Pneumatic directional valve
Valve configuration 5/2-way, single solenoid
Maximum operating pressure (bar) 7
Minimum operating pressure (bar) 2.5
Valve size (mm) 10
Flow direction Non-reversible
Standard nominal air flow (l/min) 195
Maximum switching frequency (Hz) 2
Permissible voltage fluctuations +/-10%
Supply voltage (V DC) 24
Control type Piloted
Pneumatic connection, port 2 M5
Pneumatic connection, port 4 M5
Working port thread M5
Mounting On manifold rail; With through-hole
Mounting position Any
Ambient temperature maximum (°C) 50
Ambient temperature minimum (°C) -5
Media temperature maximum (°C) 50
Media temperature minimum (°C) -5
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Construction Piston slide with sealing ring
Housing material Wrought aluminium alloy
IP rating IP65
Sealing principle Soft
Series VUVG-LK
Duty cycle (%) 100
Lubrication condition Lubricated operation possible (in which case lubricated operation will; always be required)
Manual override Detenting; Non-detenting
Manufacturer Festo
Manufacturer part number 8042543
Pilot air supply Internal
Return mechanism Pneumatic spring
Signal indication LED
Product weight (g) 45
Technical specifications
Actuation Electrical
Coil power (W) 0.8
Technical specifications
Seal material HNBR; NBR