Festo VMEF-ST-M32-M-G14 stem actuated valve
Click image to enlarge
Pneumatic directional valve

Festo VMEF-ST-M32-M-G14 stem actuated valve
Model: VMEF-ST-M32-M-G14 · Festo
  • Manufacturer:
    Festo
  • Model:
    VMEF-ST-M32-M-G14
Maximum operating pressure (bar)10
Flow directionReversible
Valve configuration3/2-way, normally closed
Control typeDirect
Thread standardBSP
Maximum switching frequency (Hz)3
Full specifications ↓ Technical catalog · PDF

Description

VMEF-ST-M32-M-G14 is a Festo stem actuated valve, factory part number 8031300. Its valve configuration is 3/2-way, normally closed and its actuation is mechanical. The working connection is 1/4" BSP.

The factory datasheet specifies 870 l/min standard nominal air flow, standardised to DIN 1343. The operating pressure range is -0.95 to 10 bar. The return mechanism is mechanical spring. The operating medium and lubrication requirements are recorded separately from pressure and temperature limits.

Do not use as a mechanical stop. Lubricated operation possible (in which case lubricated operation will; always be required).

Full specifications

Technical specifications
Component type Pneumatic directional valve
Valve configuration 3/2-way, normally closed
Maximum operating pressure (bar) 10
Minimum operating pressure (bar) -0.95
Flow direction Reversible
Standard nominal air flow (l/min) 870
Maximum switching frequency (Hz) 3
Control type Direct
Thread standard BSP
Pneumatic connection, port 1 1/4" BSP
Pneumatic connection, port 2 1/4" BSP
Pneumatic connection, port 3 1/4" BSP
Working port thread 1/4" BSP
Mounting With through-hole
Mounting position Any
Ambient temperature maximum (°C) 60
Ambient temperature minimum (°C) -10
Media temperature maximum (°C) 60
Media temperature minimum (°C) -10
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Construction Poppet seat
Construction width (mm) 20
Housing material Anodised wrought aluminium alloy
Sealing principle Soft
Series VMEF
Actuating force (N) 46
Installation condition Do not use as a mechanical stop
Lubrication condition Lubricated operation possible (in which case lubricated operation will; always be required)
Manufacturer Festo
Manufacturer part number 8031300
Nominal bore (mm) 6
Return mechanism Mechanical spring
Product weight (g) 110
Technical specifications
Actuation Mechanical
Technical specifications
Seal material NBR