Danfoss GearMe single-stage hydraulic gear pump 111.20.A52.00
Click image to enlarge
Hydraulic gear pump

Danfoss GearMe single-stage hydraulic gear pump 111.20.A52.00
Model: SNZ2NN-/-016-L-N-03-CA-Z1-B7-NN-NN-N-A-/-VGT-N-N · Danfoss
  • Manufacturer:
    Danfoss
  • Model:
    SNZ2NN-/-016-L-N-03-CA-Z1-B7-NN-NN-N-A-/-VGT-N-N
Displacement (cm³/rev)16
RotationCounterclockwise
Drive shaft specificationTang 8 x 17,8 x L=6,5 FR03
Ports position specificationStandard from catalogue
ConstructionExternal gear
Mounting flangeFlange with pilot Ø52 mm with O-ring and 4 holes for bolts through thebody
Full specifications ↓ Technical catalog · PDF

Description

111.20.A52.00 is a published Danfoss GearMe hydraulic gear pump with the complete factory model code SNZ2NN-/-016-L-N-03-CA-Z1-B7-NN-NN-N-A-/-VGT-N-N. This single-stage execution is identified individually in the manufacturer’s product range.

The factory article specifies 16 cm³/rev nominal displacement. Rotation is counterclockwise. The flange, shaft and body-port specifications below identify the published execution.

GearMe pumps use a pressure-balanced external-gear design for mobile and industrial hydraulic systems. Nominal displacement labels identify the factory execution; they are not substituted for geometric displacement or a guaranteed delivered flow. Series technical information supplements the individual article specifications.

Full specifications

Technical specifications
Component type External gear pump
Product type Hydraulic gear pump
Displacement (cm³/rev) 16
Drive shaft specification Tang 8 x 17,8 x L=6,5 FR03
Body inlet specification 20x40xM6
Body outlet specification Without inlet
Ports position specification Standard from catalogue
Construction External gear
Seal specification Standard seal
Factory model code SNZ2NN-/-016-L-N-03-CA-Z1-B7-NN-NN-N-A-/-VGT-N-N
Factory pump family SNZ2NN — Gr2 Pump In.Body-Out.Cov+RV
Manufacturer Danfoss
Manufacturer part number 111.20.A52.00
Number of stages 1
Product family GearMe
Rear cover specification Cover for pump per relief valve with Outlet port M18x1,5 (CBR_D)
Valve setting specification Setting relief valve, velocity of product per checked setting 1500 rpm and pressure 140 bar with oil ISO VG68 a 40°-50°C
Technical specifications
Rotation Counterclockwise
Mounting flange Flange with pilot Ø52 mm with O-ring and 4 holes for bolts through thebody