Variable vane pump

Bosch Rexroth PV7-2X/20-20RA01MA0-10 variable vane pump

Model: PV7-2X/20-20RA01MA0-10 · Bosch Rexroth
Displacement (cm³/rev)20
Maximum adjustable zero-stroke pressure (bar)100
Direction of rotationClockwise, viewed at shaft end
Pressure port thread1/2" BSP
Catalog reference flow (l/min)36
Control typeDirect-operated pressure control

Description

PV7-2X/20-20RA01MA0-10, manufacturer material number R900950953, is a Bosch Rexroth PV7 pressure-controlled variable-displacement vane pump. This clockwise execution uses direct-operated pressure control, NBR seals and a keyed cylindrical shaft.

The manufacturer’s RE10522 edition 2022-11 gives geometric maximum displacement 20 cm³/rev and a size-specific output-pressure limit of 100 bar. The published adjustable zero-stroke pressure range is 50–100 bar; it does not establish the actual setting of an individual supplied article. Reference flow is 36 L/min under the stated measurement conditions.

Reference maximum flow is measured at the maximum speed of 1800 rpm. Characteristic curves use 1450 rpm, viscosity 41 mm²/s and oil temperature 50 °C. The pressure adjustment range is not an individual factory-delivery preset. Actual fluid, viscosity, drain pressure, drive and commissioning conditions must follow the selected original pages.

Representative PV7 direct-operated manufacturer series photograph; shaft, flange, size and control details may differ from this execution.

Full specifications

Technical specifications
Component type Variable vane pump
Maximum adjustable zero-stroke pressure (bar) 100
Maximum drain pressure (bar) 2
Maximum operating pressure (bar) 100
Pressure port thread 1/2" BSP
Displacement (cm³/rev) 20
Displacement type Variable
Catalog reference flow (l/min) 36
Direction of rotation Clockwise, viewed at shaft end
Control type Direct-operated pressure control
Thread standard BSP
Drain port thread 1/4" BSP
Suction port thread 3/4" BSP
Fluid cleanliness ISO 4406 19/16/13
Maximum fluid temperature (°C) 70
Minimum fluid temperature (°C) -10
Operating viscosity maximum (mm²/s) 160
Operating viscosity minimum (mm²/s) 16
Series 2X
Catalog rating conditions Reference maximum flow is measured at the maximum speed of 1800 rpm. Characteristic curves use 1450 rpm, viscosity 41 mm²/s and oil temperature 50 °C. The pressure adjustment range is not an individual factory-delivery preset.
Control code A0
Control option Standard, non-lockable
Factory model code PV7-2X/20-20RA01MA0-10
Manufacturer Bosch Rexroth
Manufacturer part number R900950953
Minimum adjustable zero-stroke pressure (bar) 50
Product family PV7
Shaft specification ISO 3019-2 E25N cylindrical keyed shaft
Through-drive Without
Frame size 20
Nominal size 20
Shaft diameter (mm) 25
Technical specifications
Mounting flange ISO 3019-2 100B4HW four-hole flange
Minimum speed (rpm) 900
Maximum speed (rpm) 1800
Technical specifications
Seal material NBR