Bosch Rexroth PV7-1X/100-150RE07MD0-08 variable vane pump

PV7-1X/100-150RE07MD0-08, manufacturer material number R900915470, is a Bosch Rexroth PV7 pressure-controlled variable-displacement vane pump. This clockwise execution uses hydraulic remote pressure control, NBR seals and a keyed cylindrical shaft.

The manufacturer’s RE10515 edition 2018-11 gives geometric maximum displacement 150 cm³/rev and a size-specific output-pressure limit of 80 bar. The published adjustable zero-stroke pressure range is 20–80 bar; it does not establish the actual setting of an individual supplied article. Reference flow is 218 L/min under the stated measurement conditions.

Reference flow is measured at 1450 rpm, 10 bar and viscosity 41 mm²/s. Characteristic curves use oil temperature 50 °C. Output pressure is size-specific with HLP mineral oil; the 2 bar absolute drain-pressure limit and viscosity requirements remain applicable. Actual fluid, viscosity, drain pressure, drive and commissioning conditions must follow the selected original pages.

Remote pressure adjustment requires a separately ordered external pressure relief valve. The remote line must not exceed 2 m. Zero-stroke pressure includes the external valve setting and remote-port pressure; the actual external assembly and delivery settings are not identified.

Representative PV7 pilot-operated manufacturer series photograph; shaft, flange, size and control details may differ from this execution.